The SAT-401 satellite terminal from Honeywell Global Tracking is a multi-purpose satellite terminal for tracking and monitoring assets like vehicles, vessels, and cargo containers. The Satamatics 401 uses the Inmarsat constellation of satellites and the IsatM2M standard.
The SAT-401 terminal is powered by the asset and can be used in virtually all environments, and can be programmed to send and receive customised data from internal and external sensors – including temperature, humidity, vibration and shock.
Satamatics 401
Satamatics 401 Technical Specifications
| Physical | |
|---|---|
| Dimensions: | 112 mm x 37 mm (4.4" x 1.5") |
| Weight: | 220g (12.0 oz) excluding cables |
| Connector: | 2-way Bulgin |
| Environmental | |
| Operating Temperature: | -40 C to +70 C (-40 F to 158 F) |
| Humidity: | <95% @ +40 C (+104 F) |
| Vibration and Shock: | Meets Inmarsat-D requirements |
| IP Rating: | IP66 |
| Power (Typical) | |
| Sleep: | 1.5mW |
| Receive: | 1.5W (incl. GPS) |
| Transmit: | 6W |
| Power Supply Voltage: | 9.6V to 32V 'smoothed' DC |
| Interface | |
| Serial Interface: | Asynchronous serial RS323 |
| Baud Rate: | 4800 to 9600 bps |
| Parity / Data Bits / Stop Bits: | N, 8, 1 |
| Configurable Inputs / Outputs: | Three |
| Open Drain Output: | 250mA max. sink current |
| Satellite Connectivity | |
| Transmitter: | |
| Receiver: | |
| Elevation Angle: | |
| Frequency Range: | |
| Message Latencies: | |
| GPS: | |
| Certifications | |
| Inmarsat Type Approcval: | Yes |
| FCC: | Yes |
| CE: | Yes |
| ANATEL: | Yes |
| ICASA: | Pending |
Sat 401 Technical Specifications
Attached is the User's Manual for the Sat 201 which has the same features and operates similarly to the Sat 401.
Should you have further questions please do not hesitate to contact the TracPlus support team on support@tracplus.com or call us on +64 (3) 477 8656.